Blisters results from skin injuries, if you want to treat the wound you can use Neosporin. Clean your wound, and using clean hands you can spread an antibiotic topical cream like Neosporin. The pre-bandage step needs you to soothe your wound. Neosporin ointment couples anesthetic property with antigen quality to heal your wound.

Treating a Burst Blister

Here are seven ways you can follow to take care of a burst blister:

Avoid Spreading Bacteria From The Blister

Thoroughly wash your hands using a mild soap and warm water right before your hands come into contact with the blister or the surrounding skin. If you wash your hands for about 30 seconds, that should do it. This step will help you avoid spreading antigens to other parts of your skin which might result in further infection.

How To Clean a Blister?

Using gentle soap and warm water, thoroughly wash the affected area. Avoid brushing the blister, it will result in further damage of the lesion. Don’t use iodine, alcohol or hydrogen peroxide when washing the skin, they will cause further irritation to the damaged skin.

Drying Your Blister

Leave your blister to air dry, alternatively you can opt for a gentle pat using a towel. Avoid rubbing your blister using a cloth if you don’t want to tear your skin.

Cutting Off Dead Blister Skin

Avoid touching the skin covering the blister. The hood that forms as a result of the blister won’t stay covering the blister for a long time; however it will still assist in protecting the damaged skin as its healing. If you can, leave the soft skin covering the lesion. In case your blister tears or it attracts dirt beneath the flap, you can cut it off to stop further contamination and prevent it from tearing and affecting your healthy skin surface.

First step is to rinse off your blister well enough.Next, sanitize a pair of scissors by using rubbing alcohol. The other option is to either disinfect the scissors by immersing it in boiling water for about 20 minutes hold the tool above a naked fire till the metal turns red; you have to allow the scissor to cool down before using the tool. Be keen when you’re cutting off the dead skin surface by avoiding to trim very close to parts that don’t have blisters. You’d rather leave extra skin than cutting away a healthy part of your skin surface.

Over-The-Counter Antimicrobial Creams

Spread an antimicrobial cream or ointment on the blister to assist in stopping further contamination since you’re most likely to get an infection whenever you have burst blisters. Normal O.T.C (Over-The-Counter) antimicrobial creams and lotions such as Neosporin and ‘triple antibiotic cream’ both have bacitracin, polymyxin, and neomycin.

Non-stick Bandages For Blisters

Strap a clean bandage to cover your blister; for tinier blisters, an ordinary dressing will help; however for larger blisters you'll have to utilize non-stick netting pad that you place under a tape. Ensure you utilize netting pads and bandages that don't stick when dressing your blisters. an everyday gauze will more than likely hold to your fresh skin surface. Also you can use Hydrocolloid dressings will assist in healing your blister.; the section that touches the lesion won't stick even though it sticks to healthy parts.

Using Moleskins For Blisters

Get a unique bandage for your raw and painful blister spots. If the skin flap over the blister falls off, or you develop a blister in a sensitive part such as your foot; you need to go for a unique bandage meant for blisters. Check around your local pharmacy for unique bandages pad that offer protection on the sensitive area; another alternative is going for moleskin on your blisters. What are these Moleskins?" You ask, well, they are soft sticky-like substance that has adhesive properties. Slice two pieces of these substances that are a bit wider than your blister, shape off into a circle that's almost same size as your blister then apply stick it over your lesion. Spread it in such a manner that the gauze is right over the blister spot. Stick the other part of the moleskin over the one you spread before; avoid using liquid bandages such as 'New Skin'. These type of bandages are best for lacerations and cuts and are likely to result in more skin irritation and contamination if you decide to use it on your blister. If you're uncertain about anything, visit a nearby pharmacy or see your dermatologist to get the best recommendations.

When to use Neosporin?

Neosporin is an over-the-counter (OTC) triple-antibiotic cream comprising of three separate antibacterial agents: polymyxin, bacitracin, and neomycin. Triple-antibiotic ointments are basically used on minor cuts and blisters to prevent infection and encourage healing. Whereas some people are great believers in triple antibiotic ointment, others feel they are less than necessary for blister treatment. Using a triple-antibiotic ointment can help some blisters heal faster and with less pain. With that being said, you can frequently achieve the same results by keeping the dressing fresh and moist.

Side effects and considerations of using Neosporin to treat a blister

It is essential to note that Neosporin can sometimes lead to contact dermatitis, an allergic reaction characterized by, itching, redness, and burning of the skin. When this happens, some people might mistake the inflammation and bumps for infection and apply even on more Neosporin, making the condition worse instead of better.

In most cases, neomycin is the cause of the allergic reaction. In such a situation, the double-antibiotic ointment Polymyxin (bacitracin and polymyxin) can be used. Another major concern about Neosporin is that overuse may cause the development of antibiotic resistance.

Petroleum Jelly vs. Neosporin

Medical studies comparing petroleum jelly and Neosporin effectiveness on burn treatment show no statistical difference between applying the petroleum jelly with antibiotic and without.

You might decide to trust your body to heal the way it is supposed to without using the ointment. Nonetheless, if you have a medical condition such as diabetes that keeps your body from healing properly, then talk to your doctor about the best way for you to handle minor cuts and scratches.

How Do You treat a Broken-Burn Blister?

How To Treat Open-Burn Blisters?

Below are a few steps that will guide you when treating an open blister using antibiotic creams:

Use an Antibiotic Cream or Aloe-gel based gel For Open Blister

Blisters that are open are prone to contamination, you should therefore cover it using creams such as Neosporin. A second option is going for is spreading an Aloe-based gel since they contain antibacterial properties and also help stop contamination.

Wrap a Sterile Gauze Loosely on the Blister To Prevent Infection

Next you should cover the blister loosely and gently using a disinfected gauze to stop contamination resulting from microbes. If you want your wound to heal quickly, avoid checking the progress by uncovering the bandage for not less than a day after spreading the gel and applying the dressing.

Soak Your Bandaged Blister Before Undressing

If you want to want to uncover the dressing, you need to immerse it in lukewarm water to prevent it from sticking to your burned blister.

Re apply Ointment or gel when Dressing A Fresh bandage

After undressing the wound, spread the gel or ointment once again then cover it using disinfected netting and bandage.

Closed-Burn Blister Treatment

How To Heal a Closed-Burn Blister?

The following are the steps you should follow if you want to heal a Closed-Burned Blister:

Run cool water on your closed-burn blister

Once you get a burn, expose the lesion to running cold water for an average of four minutes. Maintain a gentle flow of running water to avoid further damage to your blister as a result of water pressure.

Wash Your Blister With an Antibiotic Soap

Follow this step by washing the blister gently with water and an antimicrobial soap. Avoid scrubbing the blister to prevent further irritation that may worsen the state of your wound. Allow your burn wound to air dry after the wash or you can gently pat it by utilizing a disinfected gauze to avoid microbial infection.

Apply Neosporin or Bacitracin on Your Blister

Dress your blister using an antibiotic cream for example Neosporin or Bacitracin. Spread adequately to maintain moisture while under the dressing; this procedure speeds up the healing process. Wrap the burn wound using a breathable bandage with adhesive properties.

Re apply Neospirin on Your Blister When Replacing the Dressing

You need to change your bandage after the end of a day or if it becomes wet or dirty. Use a clean bandage to cover the blister once you’ve spread the antimicrobial ointment; this routine is effective when you do it everyday.

Drain and Clean a Painful Blister

If the pain is unbearable, drain your blister to ease the discomfort. Ideally, you should let the wound rest for some days before you start the draining process. “How should drain the blister?” The solution is removing the bandage and then rinsing off the soap thoroughly using water and soap.Gently swab the blister using disinfected gauze immersed in rubbing alcohol. Get hold of an everyday needle and disinfect with rubbing alcohol, then proceed to slightly puncture the edge of your blister. Once the liquid drains out, wash off the area, and follow it up by applying an antimicrobial cream and dressing it using a bandage.

Cut Off dead Skin From Blister

Ideally you need to cut off any dead skin resulting from the blister after about 3 days. Dip first-aid scissors inside rubbing alcohol to disinfect it before you can puncture the blister. As soon as the fresh pink skin forms below the dead skin, you can then undress your bandage.

How Can I Treat Second-Degree Burns?

Essential 3 Step Homemade Guide For Second Degree Burns

Many second degree burns need simple DIY treatment for healing and preventing formation of scars.

Rinse the Burn

Rinse off the burn using fresh water for a minimum of 20 minutes or until the pain eases. You can lower the temperature of your skin through use of clean water, and this step also stops further damage to the neighboring skin. Opt to immersing blister affected parts inside a water basin or tub, also you can cover the wound with a compressor. Avoid putting ice or ice water on the affected region, it will result in further damage the skin. Remove jewelry, rings, etc. that may become tight in case of swelling occurs.

Clean the Burn

Always wash your hands before touching a burn. Ensure you don’t touch your wounds with dirty hands because you will increase the chances of contamination. Most people subconsciously pick on or rupture their blisters, please don’t be one of these individuals! Use water and mild soap to clean the blister then gently pat dry using a clean, soft cloth. Apply an antibiotic cream for example Polysporin or Bacitracin. Another caution is to stay away from myths of spreading butter and other sprays on your blisters since it traps the heat within the wound.

Bandage the Burn

If your burn blisters aren’t open, you don’t have to use a bandage. The only catch is burn blisters are prone to dirt and infections and you should therefore dress them well. Replace the bandage after a minimum of a day or whenever it catches dirt and moisture. The best way to remove the dressing is immersing it in warm water; make use of a non-stick bandage if you have access. Avoid wrapping the bandage too tight when you’re dressing the wound. Remember that taping a gauze may result in inflammation.

Scroll to Top